.svg){kind=small}
Normalizer
Own production
Appointment
The normalizer is designed to heat oil seeds and grains and continuously feed them into the oil press.
Raw materials: grain, oilseeds.
Characteristic
- The normalizer can be used both as an independent product and as part of production lines.
- The operation of the normalizer is controlled from the control cabinet, and in automatic lines - from the control panel of the entire production line.
|
Characteristics |
НР-1 |
NR-2 |
NR-4 |
|
Screw diameter, mm |
115 |
115 |
115 |
|
Screw pitch, mm |
140 |
140 |
140 |
|
Productivity, t/h no more, when heating grain by 50 degrees from ambient temperature |
0.5 |
1 |
1 |
|
Installed electric motor power, kW/rpm |
0.55/1500 |
1.1/1500 |
1.5/1500 |
|
Total drive power, kW |
1,1 |
2,2 |
3 |
|
Geared motor / gear ratio |
NMRV 075 / 40 |
NMRV 075 / 20 |
NMRV 075 / 15 |
|
Total power of the heating element, kW |
18 |
36 |
54 |
|
Material of the casing and screw |
AISI 304 |
AISI 304 |
AISI 304 |
|
Overall dimensions (without drive), mm - length: - width: - height: |
3150 500 690 |
4250 500 690 |
6200 510 1000 |
The principle of operation
The normalizer consists of a frame, augers, a drive, heating elements.
The conveyor screw is installed in bearing supports. The normalizer is driven by a gear motor. Heating elements are installed on the screw pipe to heat the raw materials. The working body of the normalizer is a screw rotating in a closed cylinder. The helical spiral is composed of feathers, which are rigidly fixed to the screw shaft.
The normalizer has one or more loading and unloading receivers/unloadings.
Advantages
- Low maintenance costs.
- Convenient design.
- Simplicity and safety of work.
The normalizer is designed to heat oil seeds and grains and continuously feed them into the oil press.
Raw materials: grain, oilseeds.
- The normalizer can be used both as an independent product and as part of production lines.
- The operation of the normalizer is controlled from the control cabinet, and in automatic lines - from the control panel of the entire production line.
|
Characteristics |
НР-1 |
NR-2 |
NR-4 |
|
Screw diameter, mm |
115 |
115 |
115 |
|
Screw pitch, mm |
140 |
140 |
140 |
|
Productivity, t/h no more, when heating grain by 50 degrees from ambient temperature |
0.5 |
1 |
1 |
|
Installed electric motor power, kW/rpm |
0.55/1500 |
1.1/1500 |
1.5/1500 |
|
Total drive power, kW |
1,1 |
2,2 |
3 |
|
Geared motor / gear ratio |
NMRV 075 / 40 |
NMRV 075 / 20 |
NMRV 075 / 15 |
|
Total power of the heating element, kW |
18 |
36 |
54 |
|
Material of the casing and screw |
AISI 304 |
AISI 304 |
AISI 304 |
|
Overall dimensions (without drive), mm - length: - width: - height: |
3150 500 690 |
4250 500 690 |
6200 510 1000 |
The normalizer consists of a frame, augers, a drive, heating elements.
The conveyor screw is installed in bearing supports. The normalizer is driven by a gear motor. Heating elements are installed on the screw pipe to heat the raw materials. The working body of the normalizer is a screw rotating in a closed cylinder. The helical spiral is composed of feathers, which are rigidly fixed to the screw shaft.
The normalizer has one or more loading and unloading receivers/unloadings.
- Low maintenance costs.
- Convenient design.
- Simplicity and safety of work.
Advantages of the equipment
Robust construction
Stable and reliable production
Maximum efficiency
Easy to operate
Easy maintenance
It will save space
Low maintenance costs
Long service life
