+375 17 399 33 87
Equipment for agro and timber industrial complex
12 years of experience
60 employees
3D tours
+375 17 399 33 87
Main
Spare parts
Spare parts for oil presses

Spare parts for oil presses

Order equipment Calculate the project

Выбрать категорию

Spare parts
Lines and factories
Equipment

Extruders GL-E-500 and GL-E-1000

To order

Question-answer

The deadline for the execution of the order?

The standard delivery time is from 7 days to two months, with a small amount of work, the time is reduced, with a large volume, it may increase.

The terms are additionally negotiated and agreed upon at the stage of the order.

The speed of delivery?

High, we have a large warehouse of finished parts, we have our own production. All spare parts can be ordered with delivery to any region of Belarus, Russia, CIS countries.

How do I find out the availability?

Please specify the availability of specific positions:

Do you supply spare parts for foreign-made equipment?

Globalprodservice has its own production facilities, and our designers have extensive experience in the development and design of components.We will make measurements for free, according to which we will make a set of spare parts for you!

Is it possible to order spare parts for an individual project?

You can buy a ready-made spare parts kit in stock from us, as well as order the manufacture of spare parts according to drawings or samples. The design engineers of our company can also develop their own drawing based on the sample of the part.

Are there any spare parts and accessories in stock?

Yes, a wide range of equipment is always available in our warehouses. Individual spare parts are supplied on request. 90% of our equipment does not require complex maintenance work. It is only necessary to follow simple routine recommendations on time.

How much does the delivery cost? Terms of delivery?

The cost of delivery is calculated individually, it depends on the type, volume and cost of components, delivery method and destination. We try to take into account all the wishes of the customer, including the terms of delivery. We deliver the equipment both on the territory of Belarus and abroad.

Do you provide equipment repair services? How qualified are your specialists?

Yes, our specialists carry out repair and maintenance work on the equipment purchased from us. Employees of the engineering and service department have specialized education, practical experience in the field of engineering and equipment for over 5 years.  

All questions are answered

Articles

23 September 2024

Tasks of the Globalprodservice engineering service

 09 August 2024

Leasing of lines and equipment: answers to questions

 30 July 2024

How to maintain the quality of protein in the resulting cake

 24 June 2024

The plant, equipped with our equipment, successfully produces biofuels
All articles

Own production

Screws, screw bushings, augers
Screws, screw bushings, oil press screws are part of the working chamber of the oil press, are mounted on the shaft of the oil press and are designed for longitudinal movement, abrasion of processed raw materials and pressure creation in the working chamber.
More
Order
Ask a question

Own production

Grain slats and lamelles
The seed bars (form a working gap for oil output outside the working chamber) and lamellae (facilitate oil flow outside the working chamber), together with screws, screw bushings and augers, are the main working bodies of oil presses.
More
Order
Ask a question

Own production

Knives and pressure plates
Knives and clamping plates are part of the working bodies of oil presses of the OR, RP-1000 series. The knives and clamping strips, together with the grain strips, form the inner surface of the grain chamber.
More
Order
Ask a question

Own production

Bushings, rings, cones, spacers, washers
Bushings, rings, cones, spacers, washers are parts of oil presses that form a screw assembly of the shaft of the required length together with screws, screw bushings, augers.
More
Order
Ask a question

Equipment selection wizard

Fill out the selection form, questionnaire and get the best offer for individual equipment or a complex line

Step 1 of 3

1

Equipment type

2

Questionnaire

3

Contacts

0%  filled

+80% for the 2nd step+10% for the 3rd step
What are you choosing?
What type of equipment is needed?
What line type is needed?
What type of parts are needed?

3D tours

All 3D tours
Oilseed processing line Line of vitamin-herbal flour (VTM) Plant for the production of fuel granules (pellets)

What goals will you achieve by buying the equipment?

Oilseed processing line Vitamin-herbal flour production line Plant for the production of fuel granules (pellets) Compound feed plant

Raw materials

  • Rape
  • Sunflower
  • Soya beans
  • Amaranth
  • Linen

Technological scheme

Result

  1. Products cake and oil
  2. Increased oil yield
  3. High protein cake
  4. Raw materials for own feed production

Raw materials

  • Mixed herbs
  • Alfalfa
  • Meadow grass
  • Vegetable waste

Technology system

Result

  1. Vitamin-herbal granules
  2. Vitamin-herbal flour

Raw materials

  • Sawdust
  • Wood shavings
  • Bark
  • Wood chips
  • Wood waste mixture

Technological scheme

Result

  1. Fuel pellets
  2. Fuel pellets

Raw materials

  • Cereals
  • Pulses
  • Oilseeds
  • Cake
  • Additives: vitamins, minerals, amino acids

Technological scheme

Result

  1. Loose feed
  2. Granulated feed
  3. Feed for cattle
  4. Compound feed for birds
  5. Complete feed
  6. Concentrated feed
  7. Balancing feed

Equipment advantages

  • Fast payback
  • Versatility
  • Work 24/7
  • Reliability
  • Loading 330 days a year
  • High performance
  • Wear resistance
  • Energy saving
  • Safe to use
Submit your application

Examples of completed projects

All projects

Oilseed processing line 750 kg/hour

Brest region, Stolinsky district, ag. Remel

Vitamin and herbal Flour Production Line 1.5 t/hour

Brest region, Pinsky district, ag. Zhidche

Sunflower line 1000 kg/hour

Russia, Orenburg region, Abdulinsky district, Cheganly village

Expert GlobalProdService

Our management team is available weekdays from 8:30am to 5:15pm

Ask a Question Read answers

Useful information

  • How can I find an alternative to imported spare parts for existing equipment?

    Do reverse engineering of the spare part. In other words, take an existing part, remove the dimensions from it, determine the material, coating, heat treatment, and prepare a drawing. Bring drawings or samples of parts!

    Our design engineers will make measurements for free, according to which we will make a set of spare parts for you!

  • Is it possible to visit the production of Globalprodservice, is this practiced?

    Visit Globalprodservice production is an integral part of cooperation with partners and dealers of the company. A specialist from the commercial department will arrange your visit to the production site, where you will be able to get acquainted with the full cycle of manufacturing products from a sheet of metal to a finished product.

  • Payment terms

    - Payment method – cashless payment;

    - The need for prepayment is discussed;

    - Discounts are provided individually based on the volume, cost of the order and other factors.

  • How do I order spare parts?

    Send your request in any convenient way:

    - by calling +375 29 396 68 71;

    - send the application by e-mail: parts@globalprod.by;

    - send a WhatsApp message, Viber, Telegram or leave a request for the service in one of the forms on the website and you will definitely get a call back to clarify the order.

    In the application, specify the input data for the selection of equipment, requirements, wishes, and features of the room. We will calculate the economic efficiency and propose a design solution.

Popular Topics

Screws The slats are vertical and clamping Knives Spacers Washers