Screws, screw bushings, augers
Appointment
Screws, screw bushings, oil press screws are part of the working chamber of the oil press, are mounted on the shaft of the oil press and are designed for longitudinal movement, abrasion of processed raw materials and pressure creation in the working chamber.
Characteristic
- Screws, screw bushings, augers are made by machining castings made of alloyed high-chromium cast iron. The casting of blanks is carried out according to polystyrene models baked using specific technological equipment.
- After machining, the screw blanks are subjected to additional heat treatment. The combination of the material used in the manufacture of screws with subsequent heat treatment gives the screws high hardness and wear resistance.
Screws, screw bushings, augers for oil presses
Oil Press GL-RP-500 |
|||
№ |
Name |
Overall dimensions, mm |
|
Outer diameter |
Length |
||
1 |
Screw bushing LFUYA.PMK.02-00.00.001 |
126 |
210 |
2 |
Screw bushing LFUYA.PMK.02-00.00.002 |
126 |
172 |
3 |
Screw bushing LFUYA.PMK.02-00.00.004 |
126 |
137 |
4 |
Screw bushing LFUYA.PMK.02-00.00.006 |
126 |
137 |
5 |
Screw bushing LFUYA.RP -500.03.00.006 |
126 |
235 |
6 |
Screw bushing LFUYA.RP -500.03.00.007-01 |
126 |
92 |
7 |
Screw bushing LFUYA.RP -500.03.00.007-02 |
126 |
80 |
8 |
Screw bushing LFUYA.RP -500.03.00.008 |
126 |
137 |
9 |
Screw bushing LFUYA.RP -500.03.00.006 |
126 |
137 |
Oil Press GL-RP-1000 |
|||
№ п/п |
Name |
Overall dimensions, mm |
|
Outer diameter |
Length |
||
1 |
Screw LFUYA. RP -1000.03.00.001 |
275 |
345 |
2 |
Screw LFUYA. RP -1000.03.00.002 |
275 |
200 |
3 |
Screw LFUYA. RP -1000.03.00.003 |
245 |
200 |
4 |
Screw LFUYA. RP -1000.03.00.004 |
245 |
200 |
5 |
Screw LFUYA. RP -1000.03.00.005 |
245 |
200 |
6 |
Screw LFUYA. RP -1000.03.00.006 |
245 |
200 |
7 |
Screw LFUYA. RP -1000.03.00.007 |
245 |
200 |
Маслопресс GL-OP-1000 (запасные части) |
|||
№ п/п |
Name |
Overall dimensions, mm |
|
Outer diameter |
Length |
||
1 |
Screw LFUI.OР-1000.03.00.001-01 |
198 |
330 |
2 |
Screw LFUI.OР-1000.03.00.002-01 |
198 |
200 |
3 |
Screw LFUI.OР-1000.03.00.003 |
198 |
150 |
4 |
Screw LFUI.OР-1000.03.00.004 |
168 |
120 |
5 |
Screw LFUI.OР-1000.03.00.005 |
168 |
120 |
6 |
Screw LFUI.OР-1000.03.00.006 |
168 |
120 |
7 |
Screw LFUI.OР-1000.03.00.007 |
168 |
110 |
8 |
Screw LFUI.OР-1000.03.00.008 |
168 |
110 |
9 |
Screw LFUI.OР-1000.03.00.009 |
168 |
100 |
10 |
Screw LFUI.OР-1000.03.00.010-02 |
168 |
100 |
11 |
Screw LFUI.OР-1000.03.00.011-02 |
168 |
90 |
The principle of operation
When rotating the screw, screw sleeve, screw, the turn, due to its configuration and direction, allows for the longitudinal movement of raw materials in the working chamber of the oil press from the inlet to the outlet, to ensure close contact of the processed raw materials with other elements of the working chamber (grain slats, lamellae) and its abrasion, to create the necessary working pressure, to ensure an increase in the temperature of the processed raw materials.
The bodies of screws, screw bushings, augers, due to their conical shape, reduce the gap to a grain bar or lamella, which creates additional pressure in the working chamber during the operation of the oil press.
Advantages
- High hardness and wear resistance
- Easy replacement when the winding part is worn out
- The possibility of processing various types of raw materials due to the arrangement of screws of different names
GLOBALPRODSERVICE is a developer and manufacturer of oil pressing and extrusion equipment for processing oilseeds.
We produce spare parts and components for OIL PRESSES AND EXTRUDERS of all models of our own production, and also manufacture and supply high-quality spare parts for extruders and oil pressing equipment of famous foreign brands BRONTO, FARMET, INSTAPRO.
You can order spare parts and components for OIL PRESSING EQUIPMENT and EXTRUDERS from us; we always have spare parts kits for our own products in stock. We have a large warehouse of ready-made parts, thanks to which we are able to quickly provide the necessary components. All spare parts can be ordered with delivery to any region of Belarus, Russia, CIS countries.
Screws, screw bushings, oil press screws are part of the working chamber of the oil press, are mounted on the shaft of the oil press and are designed for longitudinal movement, abrasion of processed raw materials and pressure creation in the working chamber.
- Screws, screw bushings, augers are made by machining castings made of alloyed high-chromium cast iron. The casting of blanks is carried out according to polystyrene models baked using specific technological equipment.
- After machining, the screw blanks are subjected to additional heat treatment. The combination of the material used in the manufacture of screws with subsequent heat treatment gives the screws high hardness and wear resistance.
Screws, screw bushings, augers for oil presses
Oil Press GL-RP-500 |
|||
№ |
Name |
Overall dimensions, mm |
|
Outer diameter |
Length |
||
1 |
Screw bushing LFUYA.PMK.02-00.00.001 |
126 |
210 |
2 |
Screw bushing LFUYA.PMK.02-00.00.002 |
126 |
172 |
3 |
Screw bushing LFUYA.PMK.02-00.00.004 |
126 |
137 |
4 |
Screw bushing LFUYA.PMK.02-00.00.006 |
126 |
137 |
5 |
Screw bushing LFUYA.RP -500.03.00.006 |
126 |
235 |
6 |
Screw bushing LFUYA.RP -500.03.00.007-01 |
126 |
92 |
7 |
Screw bushing LFUYA.RP -500.03.00.007-02 |
126 |
80 |
8 |
Screw bushing LFUYA.RP -500.03.00.008 |
126 |
137 |
9 |
Screw bushing LFUYA.RP -500.03.00.006 |
126 |
137 |
Oil Press GL-RP-1000 |
|||
№ п/п |
Name |
Overall dimensions, mm |
|
Outer diameter |
Length |
||
1 |
Screw LFUYA. RP -1000.03.00.001 |
275 |
345 |
2 |
Screw LFUYA. RP -1000.03.00.002 |
275 |
200 |
3 |
Screw LFUYA. RP -1000.03.00.003 |
245 |
200 |
4 |
Screw LFUYA. RP -1000.03.00.004 |
245 |
200 |
5 |
Screw LFUYA. RP -1000.03.00.005 |
245 |
200 |
6 |
Screw LFUYA. RP -1000.03.00.006 |
245 |
200 |
7 |
Screw LFUYA. RP -1000.03.00.007 |
245 |
200 |
Маслопресс GL-OP-1000 (запасные части) |
|||
№ п/п |
Name |
Overall dimensions, mm |
|
Outer diameter |
Length |
||
1 |
Screw LFUI.OР-1000.03.00.001-01 |
198 |
330 |
2 |
Screw LFUI.OР-1000.03.00.002-01 |
198 |
200 |
3 |
Screw LFUI.OР-1000.03.00.003 |
198 |
150 |
4 |
Screw LFUI.OР-1000.03.00.004 |
168 |
120 |
5 |
Screw LFUI.OР-1000.03.00.005 |
168 |
120 |
6 |
Screw LFUI.OР-1000.03.00.006 |
168 |
120 |
7 |
Screw LFUI.OР-1000.03.00.007 |
168 |
110 |
8 |
Screw LFUI.OР-1000.03.00.008 |
168 |
110 |
9 |
Screw LFUI.OР-1000.03.00.009 |
168 |
100 |
10 |
Screw LFUI.OР-1000.03.00.010-02 |
168 |
100 |
11 |
Screw LFUI.OР-1000.03.00.011-02 |
168 |
90 |
When rotating the screw, screw sleeve, screw, the turn, due to its configuration and direction, allows for the longitudinal movement of raw materials in the working chamber of the oil press from the inlet to the outlet, to ensure close contact of the processed raw materials with other elements of the working chamber (grain slats, lamellae) and its abrasion, to create the necessary working pressure, to ensure an increase in the temperature of the processed raw materials.
The bodies of screws, screw bushings, augers, due to their conical shape, reduce the gap to a grain bar or lamella, which creates additional pressure in the working chamber during the operation of the oil press.
- High hardness and wear resistance
- Easy replacement when the winding part is worn out
- The possibility of processing various types of raw materials due to the arrangement of screws of different names
GLOBALPRODSERVICE is a developer and manufacturer of oil pressing and extrusion equipment for processing oilseeds.
We produce spare parts and components for OIL PRESSES AND EXTRUDERS of all models of our own production, and also manufacture and supply high-quality spare parts for extruders and oil pressing equipment of famous foreign brands BRONTO, FARMET, INSTAPRO.
You can order spare parts and components for OIL PRESSING EQUIPMENT and EXTRUDERS from us; we always have spare parts kits for our own products in stock. We have a large warehouse of ready-made parts, thanks to which we are able to quickly provide the necessary components. All spare parts can be ordered with delivery to any region of Belarus, Russia, CIS countries.
Advantages of the equipment
Long service life
Low maintenance costs
Easy to operate
Maximum efficiency