Oil press GL-RP-1000

Appointment

It is used for pre- or final extraction of vegetable oil from high-oil crops.  

Raw material: rapeseed, sunflower, flax, heated cake after the first pressing of oil (rapeseed cake, sunflower cake, full-fat soy, flax cake), other oilseeds.

Products: oil cake, vegetable oil.

Characteristic

• Conditions of use: indoors at a temperature from +5 ° C to +40 ° C and a relative humidity of 80% at a temperature of 25 ° C
• The operation of the oil press is controlled from the control cabinet, as part of the automatic lines - from the control panel of the entire technological line
• The oil press GL-RP-1000 is disassembled and assembled without the use of lifting mechanisms
• The oil press GL-RP-1000 oil press is supplied with cold and final pressing options

The principle of operation

1. The raw materials are fed into the receiving funnel of the press hopper, transported through the grain chamber by screws.
2. In the direction of movement of the raw materials, the inner diameter (diameter of the depressions) of the screws increases, and the pitch of the screw surface decreases, which leads to a decrease in the free volume of the chamber for raw materials. As a result, the raw materials are compressed and ground, the grinding of raw materials under pressure heats up the mass and leads to the extrusion of vegetable oil.
3. The oil flows through the gaps of the grain chamber and is collected in a pallet, and then through a nozzle in the lower part of the press it is discharged into the workshop oil collection system.
4. The cake continues to move along the pressing unit, and at the outlet it is crushed by an impeller and removed from the press into a cooler or into a transportation system for the cake.

Advantages

• The rear camera is easy to maintain
• Frequency control of the press shaft
• Versatility – it can work on different raw materials
• It is simple and easy to maintain
• For smooth and continuous operation
• Warranty - 24 months

MANUFACTURER: GlobalProdService